- A study on Sintering Characteristics of Commercial 7xxx Series Al Alloy Powders
-
Panyu
-
J Korean Powder Metall Inst. 2004;11(1):69-73.
-
DOI: https://doi.org/10.4150/KPMI.2004.11.1.069
-
-
13
View
-
0
Download
-
1
Citations
-
 Abstract
 PDF
- The sintering characteristics of commercial 7xxx series Al-Zn-Mg-Cu alloy have been investigated. Sintering system of this blended elemental powder has aspects of both transient and supersolidus liquid phase sintering. Transient liquids occur when the constitution point during sintering lies in a solid phase region but where the sintering temperature is greater than either the melting point of one of the constituent or a eutectic temperature. Supersolidus liquid phase sintering occurs when a preblended powder is heated to a temperature between the solidus and liquids. However, these reaction were restrained their inter diffusion due to the appearance of the oxide film. Thus, 7xxx series Al alloy is extremely sensitive to process variables, including particle size, holding time and sintering temperature. Therefore, above phenomenons were observed formation and behaviour of the liquid by using SEM and DSC.
-
Citations
Citations to this article as recorded by  - Sintering characteristic of Al2O3-reinforced 2xxx series Al composite powders
Kyung Ho Min, Shin Pil Kang, Dae-Gun Kim, Young Do Kim
Journal of Alloys and Compounds.2005; 400(1-2): 150. CrossRef
|
kpmi
